Assign Trunk Signal - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[412] ASSIGN TRUNK SIGNAL

Allows the assignment of analogue DID or E&M cards for proper Signaling.
These trunks can also use the translation tables in MMC 714.
No
0
1
2
3
4
CONDITIONS
An analogue E&M/DID Trunk card must be installed in the OfficeServ 7000 Series system.
Or, the 'NO E&M/DID TRUNK' message is displayed.
DEFAULT DATA
IMMEDIATE START
ACTION
1) Press Transfer button and enter 412.
Display shows:
2) Enter desired trunk number. (e.g., 705)
OR
Press Volume button to make selection and press
Right Soft button to move cursor.
OR
Select all trunks.
3) Enter desired trunk type selection from above list.
OR
Press Volume button to make selection and press
Right Soft button.
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 416
MMC 714
2-130
IMMEDIATE START
DELAYED START
WINK START
NO ANSWER BACK
DIRECT BACK
ASSIGN E & M/DID RINGDOWN
DID NUMBER AND NAME TRANSLATION
Signaling condition type
DISPLAY
[701] TRK SIGNAL
IMMEDIATE START
[705] TRK SIGNAL
IMMEDIATE START
[ALL] TRK SIGNAL
IMMEDIATE START
[705] TRK SIGNAL
WINK START
© SAMSUNG Electronics Co., Ltd.