412] Assign Trunk Signal - Samsung OfficeServ 7000 Series Programming Manual

[ 412] ASSIGN TRUNK SIGNAL

1 0 9 B
Allows the assignment of analogue DID or E & M cards for proper signalling. These trunks
can also use the translation tables in MMC 714.
C ONDITIONS
5 3 9 B
An analogue E & M/DID Trunk card must be installed in the OfficeServ 7000 Series
system. Or, the 'NO E & M/DID TRUNK' message is displayed.
MMC [412]
This MMC is not shown in OfficeServ 7030.
D EFAULT DATA
5 4 0 B
IMMEDIATE START
A CTION
5 4 1 B
1) Press Transfer button and enter 412.
Display shows:
2) Enter desired trunk number.(e.g., 705)
OR
Press Volume button to make selection and
press Right Soft button to move cursor.
OR
Select all trunks.
3) Enter desired trunk type selection from above list.
OR
Press Volume button to make selection and
press Right Soft button.
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
Samsung Business Communications
No Signalling condition type
0 IMMEDIATE START
1 DELAYED START
2 WINK START
3 NO ANSWER BACK
4 DIRECT BACK
CHAPTER 2. MMC Programming
DISPLAY
[ 7 0 1] TRK SIGNAL
U U
IMMEDIATE START
[705] TRK SIGNAL
I M MEDIATE START
U U
[ALL] TRK SIGNAL
I M MEDIATE START
U U
[705] TRK SIGNAL
W I NK START
U U
2-121