Fault Logger Mode - ABB ACS350 User Manual

78

Fault Logger mode

In the Fault Logger mode, you can:
• view the drive fault history of maximum ten faults (after a power off, only the three
latest faults are kept in the memory)
• see the details of the three latest faults (after a power off, the details of only the
most recent fault is kept in the memory)
• read the help text for the fault
• start, stop, change the direction and switch between local and remote control.
How to view faults
Step Action
1. Go to the Main menu by pressing
EXIT
by pressing
2. Go to the Fault Logger mode by selecting FAULT LOGGER on the menu with
keys and
starting with the latest fault.
The number on the row is the fault code according to which the causes and
corrective actions are listed in chapter
3. To see the details of a fault, select it with keys
DETAIL
.
4. To show the help text, press
.
After reading the help, press
Control panels
MENU
if you are in the Output mode, otherwise
repeatedly until you get to the Main menu.
ENTER
, and pressing
Fault
DIAG
. Scroll the help text with keys
OK
to return to the previous display.
. The display shows the fault log
tracing.
and , and press
Display
LOC MAIN MENU
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT 00:00
LOC FAULT LOG
10: PANEL LOSS
19.03.05 13:04:57
6: DC UNDERVOLT
6: AI1 LOSS
EXIT 00:00
LOC PANEL LOSS
FAULT
10
FAULT TIME 1
13:04:57
FAULT TIME 2
EXIT 00:00
and
LOC
DIAGNOSTICS
Check: Comm lines
and connections,
parameter 3002,
parameters in groups
10 and 11.
EXIT 00:00
1
ENTER
DETAIL
DIAG
OK