118
Drive temperature
The drive supervises the IGBT temperature. There are two supervision limits: Alarm
limit and fault trip limit.
Short circuit
If a short circuit occurs, the drive will not start and a fault indication is given.
Internal fault
If the drive detects an internal fault, the drive is stopped and a fault indication is
given.
Operation limits
The drive has adjustable limits for speed, current (maximum), torque (maximum) and
DC voltage.
Settings
Parameter group
Power limit
Power limitation is used to protect the input bridge and the DC intermediate circuit.
If the maximum allowed power is exceeded, the drive torque is automatically limited.
Maximum overload and continuous power limits depend on the drive hardware.
For specific values, see chapter
Automatic resets
The drive can automatically reset itself after overcurrent, overvoltage, undervoltage,
external and "analog input below a minimum" faults. The Automatic Resets must be
activated by the user.
Settings
Parameter
31 AUTOMATIC RESET
Alarm
AUTORESET
Program features
20 LIMITS
Technical
Additional information
Automatic reset settings
Automatic reset alarm
data.