34 Panel Display - ABB ACS350 User Manual

Parameters – complete descriptions
Index Name/Selection
3304 DRIVE RATING
0x0000...0xFFFF
(hex)
3305 PARAMETER TABLE

34 PANEL DISPLAY

3401 SIGNAL1 PARAM
0, 101...172
3402 SIGNAL1 MIN
x...x
3403 SIGNAL1 MAX
x...x
Description
Displays the drive current and voltage ratings.
Value in format XXXY:
XXX = Nominal current of the drive in Amperes. An "A" indicates decimal
point. For example if XXX is 8A8, nominal current is 8.8 A.
Y = Nominal voltage of the drive:
1 = 1-phase 200...240 V
2 = 3-phase 200...240 V
4 = 3-phase 380...480 V
Displays the version of the parameter table used in the drive.
Selection of actual signals to be displayed on the panel
Selects the first signal to be displayed on the control panel in display mode.
0137
0138
0139
Parameter index in group
value is set to 0, no signal is selected.
Defines the minimum value for the signal selected by parameter
SIGNAL1 PARAM.
Display
value
3407
3406
Note: Parameter is not effective if parameter
setting is DIRECT.
Setting range depends on parameter
Defines the maximum value for the signal selected by parameter
SIGNAL1 PARAM. See figure in parameter
Note: Parameter is not effective if parameter
setting is DIRECT.
Setting range depends on parameter
3404
3405
Assistant panel
01 OPERATING DATA. E.g. 102 =
3402 3403
3404 OUTPUT1 DSP FORM
3401 setting.
3402 SIGNAL1 MIN.
3404 OUTPUT1 DSP FORM
3401 setting.
0102 SPEED. If
3401
Source value
3401
Actual signals and parameters
205
Def, FbEq
0x0000
103
1 = 1
-
-
-
-