ABB ACS350 User Manual page 153

Parameters – short form list
Index Name/Selection
3206 SUPERV 2 LIM HI
3207 SUPERV 3 PARAM
3208 SUPERV 3 LIM LO
3209 SUPERV 3 LIM HI
33 INFORMATION
3301 FIRMWARE
3302 LOADING PACKAGE
3303 TEST DATE
3304 DRIVE RATING
3305 PARAMETER TABLE
34 PANEL DISPLAY
3401 SIGNAL1 PARAM
3402 SIGNAL1 MIN
3403 SIGNAL1 MAX
3404 OUTPUT1 DSP FORM Defines the format for the displayed signal (selected by par.
3405 OUTPUT1 UNIT
3406 OUTPUT1 MIN
3407 OUTPUT1 MAX
3408 SIGNAL2 PARAM
3409 SIGNAL2 MIN
3410 SIGNAL2 MAX
3411 OUTPUT2 DSP FORM Defines the format for the displayed signal selected by par. 3408
3412 OUTPUT2 UNIT
3413 OUTPUT2 MIN
3414 OUTPUT2 MAX
3415 SIGNAL3 PARAM
3416 SIGNAL3 MIN
3417 SIGNAL3 MAX
3418 OUTPUT3 DSP FORM Defines the format for the displayed signal selected by par. 3415
3419 OUTPUT3 UNIT
3420 OUTPUT3 MIN
Description
Defines the high limit for the second supervised signal selected
by parameter 3204 SUPERV 2 PARAM.
Selects the third supervised signal.
Defines the low limit for the third supervised signal selected by
parameter 3207 SUPERV 3 PARAM.
Defines the high limit for the third supervised signal selected by
parameter 3207 SUPERV 3 PARAM.
Firmware package version, test date etc.
Displays the version of the firmware package.
Displays the version of the loading package.
Displays the test date.
Displays the drive current and voltage ratings.
Displays the version of the parameter table used in the drive.
Selection of actual signals to be displayed on the panel
Selects the first signal to be displayed on the control panel in
display mode.
Defines the minimum value for the signal selected by parameter
3401 SIGNAL1 PARAM.
Defines the maximum value for the signal selected by parameter
3401 SIGNAL1 PARAM.
3401 SIGNAL1 PARAM).
Selects the unit for the for the displayed signal selected by
parameter 3401 SIGNAL1 PARAM.
Sets the minimum display value for the signal selected by
parameter 3401 SIGNAL1 PARAM.
Sets the maximum display value for the signal selected by
parameter 3401 SIGNAL1 PARAM.
Selects the second signal to be displayed on the control panel in
display mode.
Defines the minimum value for the signal selected by parameter
3408 SIGNAL2 PARAM.
Defines the maximum value for the signal selected by parameter
3408 SIGNAL2 PARAM.
SIGNAL2 PARAM.
Selects the unit for the for the displayed signal selected by
parameter 3408 SIGNAL2 PARAM.
Sets the minimum display value for the signal selected by
parameter 3408 SIGNAL2 PARAM.
Sets the maximum display value for the signal selected by
parameter 3408 SIGNAL2 PARAM.
Selects the third signal to be displayed on the control panel in
display mode.
Defines the minimum value for the signal selected by parameter
3415.
Defines the maximum value for the signal selected by parameter
3415 SIGNAL3 PARAM.
SIGNAL3 PARAM.
Selects the unit for the for the displayed signal selected by
parameter 3415 SIGNAL3 PARAM.
Sets the minimum display value for the signal selected by
parameter 3415 SIGNAL3 PARAM.
Def Custom
-
105
-
-
type dependent
00.00
0x0000
103
-
-
DIRECT
Hz
-
-
104
-
-
DIRECT
-
-
-
105
-
-
DIRECT
-
-
Actual signals and parameters
153