Cisco D9854 Installation And Operation Manual page 133

Setup Menu: Outputs,
Insert Null Packet
Description:
Parameters:
Instance Name
Description:
Parameters:
MOIP
Description:
Parameters:
Send SAP
Description:
Parameters:
SAP ID
Description:
Parameters:
DestAddr
Description:
Parameters:
UDPPort
Description:
Parameters:
SrcPort
Description:
Parameters:
4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide
Continued
This parameter selects whether to insert null packets in the output
stream.
Yes or No.
This is the DPM output instance name.
Up to 31 characters.
Selects the transport protocol to be used for the output stream.
RTP or UDP.
This selects whether to send Session Announcement Protocol
messages.
Yes or No.
This is the SAP identifier (ID)/string.
Up to 49 characters.
Enter the multicast destination IP address.
0 to 255 for each of the four fields in the format ###.###.###.###.
For example, 225.1.1.1.
This selects the destination port number.
1 to 65535.
Note: If you selected RTP for MOIP, you must select an even
destination port number.
This selects the source UDP port number.
0 to 65535.
4-71