Startup Screen - Cisco D9854 Installation And Operation Manual

Startup Screen

Menu Structure
On power-up and initialization, the startup screen is displayed similar to that
shown below. The screen also indicates the signal status.
PE1 12345 Channel Name
RF1 Freq:12.658 Lvl:-50 Marg:11.6
Startup Screen
Channel Authorization Status
From the startup screen, press the right or left arrow keys on the front panel keypad
to move to the PE entry authorization status screen. This screen indicates whether
the selected channel is authorized.
LCD Panel
The LCD panel displays basic signal and program information in the LCD display,
as described in the following illustration:
LCD Setting
PE
12345
Channel name
4-8 Model D9854 Advanced Program Receiver Installation and Operation Guide
Auth Status
Y Indicates the channel is authorized.
N Indicates the channel is not authorized.
Program Entry (PE). The receiver supports up to 16
program entries at the analog outputs.
PE1 is used by the PowerVu signal only.
PE2 to PE16 is used by the Conditional Access Module
(CAM) only.
Channel for program monitoring.
Name of the monitored program.
PE: 1
s
Auth:Y
Channel Authorization Status Screen
Description
Description
4021470 Rev D