Viewing The Video Status - Cisco D9854 Installation And Operation Manual

Viewing the Video Status

To View the Video Status
Proceed as follows to view the Video Status page:
From the user interface of the D9854, click the Status tab, expand Services, and then
click Video icon from the sub-page.
The following table describes the Video Status information displayed:
Encoding
Resolution
Video Bitrate (Mbps)
3:2 Pulldown
Primary
Std Def
4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide
Video Status
The input stream type of the received signal/
program.
The input source resolution of the received signal/
program (SD480i/2997, SD480i/3000, SD576i/2500,
HD720p/5000, HD720p/5994, HD720p/6000,
HD1080i/2500, HD1080i/2997, HD1080i/3000,
Unknown or Unsupported).
Bit rate of the received video program. Typically
25.0, 29.97, 30.0, 50.0, 59.94, 60.0, unknown or
unsupported.
Indicates whether 3:2 pulldown mode is detected
(Yes, No or Recent).
The output video format (Auto, SD, HD 720p, or HD
1080i).
Displays the video format for the output when the
input video is SD format (Auto, NTSC, PAL-N (AR),
PAL-M or PAL-B/G/I/D. Use NTSC for 525-line
systems and PAL-B/G/I/D for 625-line systems).
Description
5-21