Cisco D9854 Installation And Operation Manual page 252

Alarm Message
Type
PE n: ISE Not Set
Auth
6-4
Message
Channel is not
authorized
Channel requires an
authorization key
Channel is blacked
out
Channel uses an
unknown CA system
Channel
authorization refused
Channel requires an
IRD with CA support
Channel requires the
PE to have an ISE
Model D9854 Advanced Program Receiver Installation and Operation Guide
Cause/Remedy
Cause: The channel is
unauthorized for the
current program.
Remedy: Contact
your (uplink) service
provider to
determine whether
you are authorized to
receive the current
program.
Cause: Conditional
access not supported.
Remedy: Contact
your (uplink) service
provider to
determine whether
you are authorized to
receive the current
program at this time.
Cause: Hardware
issue.
Remedy: Clear
alarms, reset unit,
and notify customer
service if problem
persists.
Description Severity
Program Minor
unauthorized
because the tier
bits do not
match.
Program is
unauthorized
because the unit
does not have an
authorization
key.
Program is
unauthorized
because at a
minimum, it
needs to match
one blackout
code.
Non-SA
conditional
access system.
There is
mismatch in the
Conditional
access.
Conditional
access is not
supported.
Hardware fault.
4021470 Rev D