Cisco D9854 Installation And Operation Manual page 139

Setup Menu: Outputs: TS Out: DPM,
Unref
Description:
Parameters:
PSI Options
Description:
Parameters:
4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide
Continued
This selects the DPM action to use for unreferenced content.
Unreferenced content is the remainder of the transport that is not
filtered by the program entries.
Drop All or Pass All. Default is Drop All.
Output
ASI
MOIP1
This option allows the operator to specify which PSI tables to
include in the program/output stream.
Pass All, Drop All or Control by Table.
PSI Options
Pass All
Drop All
Ctl By Table
Unref
Pass, Drop
Pass, Drop
Description
Transmits the incoming PSI Tables as is;
does not modify the content and rate.
Does not transmit any PSI Tables.
The operator can enter the Tables menu to
select the output mode for each table. The
default table selections will be all pass, and
only with CDT dropped.
4-77