Cisco D9854 Installation And Operation Manual page 120

Setup Menu: CI,
CI
PE
Description:
Parameters:
Decrypt
Description:
Parameters:
CI Slot
Description:
Parameters:
4-58 Model D9854 Advanced Program Receiver Installation and Operation Guide
Continued
This selects the Program Entry to decrypt the associated program.
PE1 to PE16
If PE1 is selected (default), Auto is automatically selected in the CI
Slot parameter. The software automatically assigns the top or
bottom slot that matches the stream. If PE1 is in Auto mode, the
Decrypt parameter must be ON (COMP and OFF are invalid).
If you select PE2 to PE16, you can optionally select COMP for the
Decrypt parameter. If you select COMP, you can customize the PID
and stream type for decryption.
Determines whether to decrypt the program selected for the PE on
the selected CAM.
ON (default), OFF, COMP (PE2 to PE16 only)
If you are configuring PE2 to PE16, you can select COMP to
customize the PID or stream type to decrypt the program.
Indicates the CI slot location of the CAM.
Top, Bottom, Auto (PE1 only)
If you are configuring PE1, you can select Auto and the CI slot is
automatically assigned to the card that matches the stream (top or
bottom).
If you are configuring PE2 to PE16, you can select to decrypt the
CAM located in the top or bottom slot.
4021470 Rev D