Section E - Power And General Specifications; General; Power - Cisco D9854 Installation And Operation Manual

Section E - Power and General Specifications

General

Item
LCD
Keypad
LEDs

Power

AC Power Connector
Item
Type of connector
AC input
Power
Current
Power Quality
Power
To operate the receiver, you must connect it to an AC power source.
WARNING:
Make sure that at least one end of the power cable(s) remains easily accessible
for unplugging, if you need to switch off the unit. For example: Ensure that the
socket outlet is installed near the product.
WARNING:
To avoid electrical shock, connect the three-prong plug on this product to an
earth-grounded three-pin socket outlet only.
A-16 Model D9854 Advanced Program Receiver Installation and Operation Guide
2 lines of 40 characters, backlit LCD.
Arrow keys, 0 to 9, SELECT, MENU, INFO, ADV, MAP,
APPLY and NAV keys.
Green LED for Signal status. Red LED for Alarm indication.
IEC 320 style C14 appliance receptable
100 to 240 V AC, 50/60 Hz
37 W max.
0.34 A @ 240 V AC typical, 0.5 A @ 120 V AC typical
ANSI/IEEE Std C62.41.1-2002
Specification
Specification
4021470 Rev D