Appendix E Compliance; Applicable Standards And Notices - Cisco D9854 Installation And Operation Manual

Applicable Standards and Notices

Safety
The D9854 Advanced Program Receiver has been approved for safety by the
Standards Council of Canada and the OHSA (NRTL) Accredited Testing
Laboratory to the following standards:
CAN/CSA-C22.2 No. 60950-1-03
UL Std No. 60950-1-2003
Also, this product is being evaluated under the IECEE CB scheme to the following
international standard:
IEC 60950-1 (1st Ed)
For the CB report and Certificate, the product is evaluated for the country
differences outlined in CB Bulletin 109A:
EMC
Electrostatic Discharge (ESD) results from the static electricity buildup on the
human body and other objects. This static discharge can degrade components and
cause failures.
Take the following precautions against electrostatic discharge.
• Use an anti-static bench mat and a wrist strap or ankle strap designed to safely
ground ESD potentials through a resistive element.
• Keep components in their anti-static packaging until installed.
• Avoid touching electronic components when installing a module.
Electromagnetic Compatibility Regulatory Requirements
Ethernet cables should be of single-shielded or double-shielded type. Coaxial cables
should be of the double-braided shielded type. Where this equipment is subject to
USA FCC and/or Industry Canada rules, the following statements apply:
FCC Notices
This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when operated in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions
supplied in this manual may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception (which can be determined by turning the
4021470 Rev D Model D9854 Advanced Program Receiver Installation and Operation Guide
Appendix E
Compliance
E-1