Cisco D9854 Installation And Operation Manual page 49

Installing the D9854 Receiver,
To Connect AC Power
To connect AC power to the D9854 receiver do the following:
1. Connect the power cord (supplied with the D9854 receiver) between the rear
panel power receptacle and a 100 to 120/200 to 240 V AC power outlet.
2. Make sure that the power cable is connected to protective ground.
See Grounding, page 3-4 for more information.
The D9854 receiver is equipped with one power supply located in the rear of the
chassis. Note the location of the power supply in the event of alarms/warnings
resulting in replacement of a power supply. Alarm messages appear in the Message
Log.
4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide
Continued
3-5