Cisco D9854 Installation And Operation Manual page 229

Configuring User Settings,
8. The DPM Regenerate Option selects whether to regenerate the PSI tables. Select
Always or As Needed (only if the content has changed).
9. Set Flash AW Messages to Enable to flash alarms and warnings on the front
panel of the receiver.
10. Click Save to save the user settings.
11. The Lock level sets the front panel keypad lock level (0, 1, 2, or 3).
Note: Lock level 4 can only be changed through a telnet session or a PNC
uplink signal.
12. Enter the Lock level Password to successfully set the current lock level. The
default password for all lock levels is 1234.
13. Click Save to save the lock level settings.
4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide
Continued
5-65