Setup Menu: Outputs,
Cue Tone Test
Description:
Parameters:
Mode
Description:
Parameters:
Run Test
Description:
Parameters:
M1/M2
M1 Port Type
Description:
Parameters:
M2 Port Type
Description:
Parameters:
4021470 Rev D
D9854 Advanced Program Receiver Installation and Operation Guide
Continued
Specify the cue tone digits you want to test locally.
000 to 999.
Specify what to test in sequence.
* for Start Tone and # for End Tone.
Verifies the cue tone test according to the Cue Tone Test and Mode
set above.
Yes or No.
This option allows the operator to set the output format for the M1
port.
ASI, SDI.
This option allows the operator to set the output format for the M2
port.
ASI, SDI.
4-65