Cisco D9854 Installation And Operation Manual page 73

Startup Screen,
Continued
Assigning a Program to the Program Entry
To assign a program to the PE:
1. Press MENU until you display the startup screen.
PE #
PE1 706
RF1
The PE (Program Entry) channel is initially displayed.
Note: PE1 is the default.
2. Press the ADV key to select PE1.
PE
PE1 1
RF1
3. Press the UP or DOWN arrow key to scroll through the available program
entries.
4. Press ADV again to select the channel number.
PE1 1
RF1
5. Directly enter the channel number using the 0 to 9 keys.
4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide
Ch #
Channel Name
Freq:12.658 Lvl:-50 Marg:11.6
Channel Name
Freq:12.658 Lvl:-50 Marg:11.6
Ch #
Channel Name
Freq:12.658 Lvl:-50 Marg:11.6
s
s
s
4-11