Cisco D9854 Installation And Operation Manual page 121

Setup Menu: CI,
COMP only
For PE1 to PE16, if you selected COMP for the Decrypt parameter, you can
customize the PID or stream type to decrypt the program.
To add a record, press the Edit button, select Insert and define the appropriate
parameters.
Note: To delete an existing record, select Delete and confirm your deletion.
There are three different methods in setting a customized record.
If you set by
PID
Stream Type
Stream Type: User Set Mode to Stream, Stream type to User, manually
Idx
Description:
Parameters:
PE
Description:
Parameters:
Mode
Description:
Parameters:
PID
Description:
Parameters:
4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide
Continued
Set Mode to PID and enter PID number.
Set Mode to Stream, select a Stream type (audio, video,
subtitle, ttx, or user) and enter Inst (instance) of the
stream type.
There is an additional configuration if you select user as
the Stream type (see below).
enter the stream code in Type, and then the Inst
(instance) of the stream type.
Indicates the customized record number. This is read-only.
1-64 (up to 32 records for each CAM).
Set the Program Entry to decrypt the associated program.
1 to 16.
Set the Mode to PID if you want to enter the PID number. Set the
Mode to Stream to manually customize the stream parameters.
PID or Stream.
Select the program PID number. It is only used if the Mode was set
to PID.
0 to 8192.
Parameter Settings
4-59