Cisco D9854 Installation And Operation Manual page 154

Setup Menu: Noise Cutoffs,
Note: Muting Control must be set to Enable for these settings to be active.
Audio Default C/N Margin Relationship
Audio
C/N Margin
Restore Defaults
Description:
Parameters:
Muting Control
Description:
Parameters:
4-92 Model D9854 Advanced Program Receiver Installation and Operation Guide
Continued
Audio Cutoff
0.0
Audio Restore
0.1
This restores the RF options to their factory set (default) values.
Yes, No.
This allows you to mute the transport stream and audio in the event
of an unstable signal, poor signal or no signal condition.
Enable, Disable. The default is Enable.
Audio Muted
Audio Restored
4021470 Rev D