Configure Task And Voiceconsole; Honeywell Rp4D Printers; Configure Rp4D Printer - Honeywell A700 Hardware Reference Manual

Configure task and VoiceConsole

1. Set the following advanced parameter in Task config
printerport = bt_print
2. Turn on Bluetooth on the A700x.
3. View the properties of the A700x and ensure Bluetooth is enabled. If it is not enabled, click
Edit this device and set Bluetooth Enabled to "enabled".
4. Select Pair this device with a peripheral.
5. For Pairing type select "Bluetooth Printer".
6. For Connection Mode select "Device initiates connection with peripheral".
7. In the Bluetooth Address field enter the Bluetooth MAC address of the scanner. This 12-
character ID is found
From the RP2D display under Bluetooth settings
l
The MAC address may also be displayed on the device label.
l
8. If using security:
a. For Security select "Enabled."
b. For Security Key enter the key entered when enabling authentication.
9. Click Pair with peripheral to initiate pairing.

Honeywell RP4D Printers

Configure RP4D Printer

1. Install the following on your PC:
• NETira CT_1.00.111.zip utility (to configure RP4 settings), download from Software >
l
Printers > Printer Support and Drivers > Printer Configuration Tools > Netira CT using
the link below
This item can be downloaded from the Honeywell Technical Support Downloads portal:
https://hsmftp.honeywell.com.
2. You must have an account to download software. Create an account if you don't already
have one.
3. If you have not previously installed the Honeywell Download Manager, you must download
and install it before downloading these items.
4. After the items above are installed on the PC, power on the RP4D printer.
5. Attach the RP4D printer to the PC using the printer cable with a serial port on one end and
a printer port on the other end.
6. Open the NETira CT program.
7. Check for Bluetooth MAC address.
8. Make other configuration changes as desired, for example enabling security and setting a
security key.
Configure task and VoiceConsole
1. Set the following advanced parameter in Task config
printerport = bt_print
2. Turn on Bluetooth on the A700x.
3. View the properties of the A700x and ensure Bluetooth is enabled. If it is not enabled, click
Edit this device and set Bluetooth Enabled to "enabled".
4. Select Pair this device with a peripheral.
5. For Pairing type select "Bluetooth Printer".
Voice Device and Headset Hardware Reference Guide 188