Breaking A Pairing - Honeywell A700 Hardware Reference Manual

Breaking a Pairing

There are several methods to break a pairing between a Vocollect wireless headset and a
Bluetooth device.
Method
From the
Device:
From
VoiceConsole:
From an SRX2
or SRX3
Headset:
Voice Device and Headset Hardware Reference Guide
Description
A device can break a pairing with a wireless headset by initiating a new
search for headsets. The user can initiate the device query by holding down
the Plus (+) and Minus (-) buttons on the device. This method is useful if the
user's device completes a cross pairing with the wrong headset; the user
can initiate another manual pairing. Manual pairing must be enabled on
the device for this procedure to work.
VoiceConsole displays all Bluetooth pairings including the headsets,
Talkman devices, scanners, and printers. From the Edit Device page, you
can clear a pairing. You can do this with headsets as well.
The headset user can break any pairing by pressing the Plus (+) and Minus
(-) buttons momentarily.
This is the preferred method for breaking a pairing. The headset signals the
device that the pairing is being broken (see SRX2 note below).
IMPORTANT
If the buttons are held too long (for more than one second) the button
press is ignored.
NOTE
For SRX2 users: If the paired device is running a version of Vocollect
VoiceCatalyst prior to 1.2, the pairing breaks only after it times out.
134