Screen-Based Pairing With A Handheld Device; Handheld Device Pairing Status Icons - Honeywell A700 Hardware Reference Manual

5. Verify that the number matches the serial number on the Talkman device.
If you need to attempt the pairing again, re-enter pairing mode by press the Plus (+) and
Minus (-) buttons on the Talkman device again.
6. Press the Play/Pause button on the Talkman device to confirm the number.
7. Press the Play/Pause button again to begin working.

Screen-Based Pairing with a Handheld Device

Screen-based pairing is the preferred method for pairing a headset with a handheld wireless
device or PC. This method allows the user to pick a specific headset from a list of available
headset Bluetooth addresses displayed on a screen, and eliminates the problem of unwanted
cross pairing. Auto and manual pairing processes are not available in screen-based pairing.
Prerequisites:
The headset is powered off.
l
The handheld device is not in a charger, and there is no wired headset connected to it.
l
The device is in sleep mode — not in use running an application.
l
The device is Bluetooth ready with Bluetooth connection features enabled.
l
1. Turn on the headset. The headset starts up in low power pairing mode.
NOTE
Some handheld devices may require the headset to be in high power pairing mode in
order to be discovered in the device's pairing inquiry. To change to high power pairing
mode, press and release the Plus (+) and Minus (-) buttons on the headset while it is in
low power pairing mode.
2. Initiate the pairing inquiry from the master device by pressing or clicking the appropriate
button on the screen or device.
3. Hold the headset and wireless device so they are within six inches of each other but not
touching.
4. Select the ID number of the headset you want to use from the list on the screen.
5. Tap, click, or press the appropriate button on the screen or device to create the pairing.
The device briefly displays that the device attempts to connect to the headset . Once the
headset connects, three tones play in the headset, the SRX Headset Status displays as
Connected. The pairing confirmation step is skipped because the pairing was specified by
the user.
6. Press the Play/Pause button to begin working.

Handheld Device Pairing Status Icons

When using the Vocollect Voice or Voice MP application on a handheld wireless device, an icon in
the upper right hand corner of the screen indicates the pairing status. Vocollect Voice on a PC
displays similar browser-based notifications, but the icons are different.
131 Voice Device and Headset Hardware Reference Guide