Training Using A Printed List Of Words - Honeywell A700 Hardware Reference Manual

NOTE
This feature is supported using VoiceConsole 3.0 or newer with VoiceClient 3.5 and newer
and VoiceCatalyst MP 1.0 and newer.

Training Using a Printed List of Words

If you suspect operators may have a difficult time recognizing the words the device is speaking
during training, you can create a print out of the words used in the task that the device will ask
the operators to train.
NOTE
This method is supported when using VoiceConsole 3.1 or newer.
1. If a current operator has previously performed the task the new operator is going to use, go
to VoiceConsole and perform the steps for viewing an operator's voice templates using the
current operator. See Managing Operator Numbers in the VoiceConsole online help for
more information.
2. On the Manage Operator Templates:<operator name> page in VoiceConsole, print the list of
trained words. See Viewing Printable Versions of List Data in the VoiceConsole online help.
3. If necessary, on the printed list, circle commonly misheard or confusing words.
Printed List with Commonly Misheard or Confusing Words Circled
4. Honeywell recommends the new operator review the list prior to training so he or she is
familiar with the words that will be used
If templates have not been trained for the task the new operator is going to use, have the
supervisor or current operator train templates for that task and perform the steps above. To
proceed with the actual training, follow the detailed list of instructions in the "Training with the
Talkman Only" section above.
31 Voice Device and Headset Hardware Reference Guide