Installing The Usb Driver On Windows; Collecting Platform Debug Logs From A700 Devices; Using The A700/A700X; Turning On An A700/A700X - Honeywell A700 Hardware Reference Manual

Installing the USB Driver on Windows

When you connect an A700x or A700 device to your Windows PC, the PC will search for a USB
driver to install. If the PC is configured to search for drivers online and the connection succeeds,
the driver will install automatically and the A700x or A700 device will be ready to use. If the
automatic installation fails, follow these steps.
1. Navigate to the .inf and .cat files in the USB Driver folder on the VoiceConsole software DVD
and save both files to your computer.
2. Open Device Manager and locate Talkman USB Serial.
3. Right click it and select Update Driver.
4. Select Browse my computer for driver software.
5. Select Let me pick from a list of device drivers on my computer.
6. Click Have Disk. Navigate to the location where you saved the .inf and .cat files.
7. Select the TalkmanUsbSerial.inf file. If there is a driver warning, or a prompt about
proceeding, indicate that you want to continue.

Collecting Platform Debug Logs from A700 Devices

Make sure that the USB driver is installed for the PC that you are using to collect logs.
1. Using a standard USB cable, connect the device to a computer.
2. Power on the device.
3. On your computer, run a serial terminal emulator, such as HyperTerminal, using the
following settings:
Bits per Second: 57600
l
Data Bits: 8
l
Parity: None
l
Stop Bits: 1
l
Flow Control: None
l
The device transfers platform logs 30 seconds after connection and then once a minute after
that. The results are viewable within the serial terminal emulator window.

Using the A700/A700x

Turning On an A700/A700x

Before you turn on a device, make sure a headset and charged battery are properly connected to
it.
17 Voice Device and Headset Hardware Reference Guide