Maxicode - Honeywell A700 Hardware Reference Manual

Registry Key
DatabarOmniDirectionalCodeMark
DatabarLimitedCodeMark
DatabarExpandedCodeMark
DatabarOmniDirectionalUDSI
DatabarLimitedUDSI
DatabarExpandedUDSI
* The A730x only supports one of these parameters enabled at a time:
DatabarOmniDirectionalActivation, DatabarLimitedActivation, DatabarExpandedActivation.

Maxicode

Support for the parameters in the table is labeled as follows:
= Parameter is supported and available via the Scanner Options tab in the device profile.
ü
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Maxicode]
Registry Key
MaxicodeActivation
Mode0
Voice Device and Headset Hardware Reference Guide
Default
A730
Value
0x2a
ü
0x2a
ü
0x2a
ü
C3
ü
C4
ü
C5
ü
Default
A730
Value
0x0
ü
0x0
ü
A730x Description
A single character inserted before the
bar code data to indicate the
ü
symbology.
A single character inserted before the
bar code data to indicate the
ü
symbology.
A single character inserted before the
bar code data to indicate the
ü
symbology.
User-defined symbology identifier.
ü
Range is 0-4 characters.
User-defined symbology identifier.
ü
Range is 0-4 characters.
User-defined symbology identifier.
ü
Range is 0-4 characters.
A730x Description
Enables the Maxicode symbology.
ü
Enables the obsolete Mode 0 variant of
X
Maxicode.
58