Code 128 - Honeywell A700 Hardware Reference Manual

Registry Key
Code39StartStopTransmission
Code39AcceptedStartCharacter
Code39FullASCIIConversion
Code39UDSI

Code 128

Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Code 128]
Registry Key
Code128Activation
ISBT128Activation
GS1-128Activation
43
Default
A730
Value
0x0
ü
0x2
ü
0x0
ü
B1
ü
Default
A730
Value
0x1
ü
0x0
ü
0x1
ü
Voice Device and Headset Hardware Reference Guide
A730x Description
Enables transmission of start/stop
ü
characters.
Selects start character, where
1 = '$',
X
2 = '*', and
3 = '$' and '*'.
Enables extended character set
through the use of control characters,
where
ü
0 = disabled and
1 = enabled (extended spec).
User-defined symbology identifier.
ü
Range is 0-4 characters.
A730x Description
Enables the standard Code 128
ü
symbology.
Enables the International Society of
Blood Transfusion's variant of Code
ü
128.
Enables the GS1 (formerly EAN)
ü
variant of Code 128.