Numbered Error Messages - Honeywell A700 Hardware Reference Manual

NOTE
Not all numbered error messages displayed in VoiceConsole have a corresponding spoken
message.

Numbered Error Messages

Number Text
0x020a Event detect initialization failed.
Event control failed to create shared
0x0203
data module.
0x0206 Battery is getting low.
Battery is getting low. Change battery
0x0207
now.
Battery is very low. Powering off. Must
0x0208
replace battery after power off complete.
0x0602 Noise sampling procedure failed.
0x0603 Noise sampling procedure timed out.
0x0605 Invalid operator file name.
0x060c Train returned bad status to UpdTrain.
Unable to train words. Not enough free
0x060e
flash memory.
0x0802 Speak failed to initialize properly.
0x0804 Speech-out failed. Audio system failure.
0x1201 Dialog power-off failed.
0x1202 Task not loaded. No task name available.
0x1203 OperLoad failed -- TmplSend busy.
261
Solution
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
Change the battery.
Change the battery.
Change the battery.
—
—
—
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
—
1. Check the crashdump file. For more information, see the
VoiceConsole online help.
2. Turn the device off and then turn it back on again.
3. Reboot the device.
4. Reload VoiceClient.
1. Check the crashdump file. For more information, see the
VoiceConsole online help.
2. Turn the device off and then turn it back on again.
3. Reboot the device.
4. Reload VoiceClient.
1. Check the crashdump file. For more information, see the
VoiceConsole online help.
2. Turn the device off and then turn it back on again.
3. Reboot the device.
4. Reload VoiceClient.
—
—
Voice Device and Headset Hardware Reference Guide