Pairing A Headset By Voiceconsole Pairing; More About Srx3 Pairing Modes - Honeywell SRX3 User Manual

Icon Status
The device is connected to the headset

Pairing a Headset by VoiceConsole Pairing

The VoiceConsole pairing method should only be used if the device/headset
pairing will be performed once and never changed. While manual pairing can
also result in this permanent pairing, VoiceConsole eliminates the device inquiry
step and begins paging immediately for the Bluetooth address.
Prerequisites:
l
l
l
l
1. In VoiceConsole , click Devices and select the device for the pairing.
2. In Device Actions, select the actions for pairing to a peripheral, and
3. Place the headset in pairing mode.
4. When the two connect, the headset will play ascending connect tones. The
5. Press the Play/Pause button to begin working.

More about SRX3 Pairing Modes

When a headset is in pairing mode it is ready to respond to any inquiries about
its Bluetooth services. The inquiring device uses this response to determine if it
wants to pair with the headset. Because the device is the initiator and the
headset is the acceptor, a user facilitates the pairing process by putting the
headset into pairing mode before initiating the connection from the device.
SRX3 headsets support two pairing modes.
l
39
The headset is powered off.
The device is not in a charger, and there is no wired headset connected to it.
The device is in sleep mode — not in use running an application.
The device is Bluetooth ready with Bluetooth connection features enabled.
complete the pairing. See VoiceConsole help for detailed instructions.
The pairing can be performed with the device powered off or while the
device is running an application. When the device powers up or goes into
sleep mode, the paging process begins.
On an SRX3 headset: press the Power button to turn it on.
l
pairing confirmation step is skipped because the pairing was specified by
the user.
Low Power Pairing Mode
Low power pairing mode is the default pairing mode for SRX3 headsets. In
this mode, a headset will answer a Bluetooth device inquiry with a very low
power response that transmits within a small area (a few feet or so,
depending on the receiving capabilities of the inquiring device).
Limiting the wireless transmission helps to avoid an unwanted cross pairing
SRX3 User Guide - Preliminary