Honeywell A700 Hardware Reference Manual page 290

Error Message
"No task list file found. Task unchanged."
"Noise sampling procedure failed."
"Noise sampling procedure timed out."
"Operator load failed."
"Power-off error."
"Self test mode set, but no script file found."
"Software error while changing task. Task unchanged."
"Task load failed."
"Task not loaded. No task name available."
"Telnet client process failed to start."
"Telnet session manager failed to start."
"Telnet VT220 emulation process failed to start."
"Unable to receive input data."
Voice Device and Headset Hardware Reference Guide
Solution
1. Reload the task.
2. Turn the device off and then turn it back on again.
3. Reboot the device.
4. Reload VoiceClient.
1. Sample noise again.
2. Go to a quieter location and perform another noise
sample.
3. Try using another headset and perform the noise sample.
NOTE
If this solves the problem, the first headset might be
damaged.
1. Sample noise again.
2. Reboot the device.
1. Go to an area of known good coverage.
2. Turn the device off and then turn it back on again.
3. Reboot the device.
4. Reload VoiceClient.
1. Power on the device.
2. Reboot the device.
Edit the task configuration file, taskname.vcf, and change the line
selftest=1 to selftest=0.
1. Go to an area of known good coverage.
2. Turn the device off and then turn it back on again.
3. Reload the task.
4. Reboot the device.
5. Reload VoiceClient.
1. Go to an area of known good coverage.
2. Turn the device off and then turn it back on again.
3. Reload the task.
4. Reboot the device.
5. Reload VoiceClient.
1. Reload the task.
2. Turn the device off and then turn it back on again.
3. Reboot the device.
4. Reload VoiceClient.
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
268