Srx2/Srx3 Headset Battery Charger; Srx2/Srx3 Headset Battery Charger Specifications - Honeywell A700 Hardware Reference Manual

3. Attach the charger to the DIN rail by hanging the two hooks on the back of the unit on the
top lip of the rail.
4. Slide the charger horizontally to the desired position on the rail, and rotate the locking
arms into the locked position - flush with both sides of the unit.
5. If the charger does not feel secure on the rail, adjust the rubber stops on the back of the
unit by screwing them out toward the wall.
6. Plug the power supply into a power source and check the LED indicator at the bottom right
of the charger face. If the indicator light is a solid green, the charger is powered on.

SRX2/SRX3 Headset Battery Charger

The SRX2/SRX3 20-bay or 6-bay battery charger can be used with SRX2 or SRX3 batteries.
The SRX2/SRX3 battery charger has two models, a 20-Bay charger to charge up to 20
l
batteries at one time, and a 6-Bay charger to charge up to 6 batteries at one time.
The LED indicator light on the charger front panel indicates if the charger is powered on or
l
not.
Each battery port has LED lights that indicate battery charge status and battery health.
l
SRX2/SRX3 headset battery chargers are designed to be placed on a desktop or mounted
l
on a wall using a DIN rail. Customer with multiple chargers must allow the required space
between wall mounted units and must avoid stacking desktop units on top of each other.

SRX2/SRX3 Headset Battery Charger Specifications

Weight
Width
Depth
Voice Device and Headset Hardware Reference Guide
20-Bay Charger
8 lbs (3.63 kg) with 20 batteries
6.38 lbs. (2.89 kg.) without batteries
Approximately 55 cm (21.65 in.)
Approximately 15.8 cm (6.22 in.)
6-Bay Charger
2.5 lbs. (1.14 kg) with 6 batteries
2.1 lbs. (0.96 kg.) without batteries
Approximately 26.67 cm (10.5 in.)
Approximately 11.43 cm (4.5 in.)
164