Tlc 39 - Honeywell A700 Hardware Reference Manual

IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Codablock]
Registry Key
CodablockAActivation
CodablockFActivation
CodablockACodeMark
CodablockFCodeMark
CodablockAUDSI
CodablockFUDSI

TLC 39

Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\TLC 39]
Voice Device and Headset Hardware Reference Guide
Default
A730
Value
0x0
ü
0x0
ü
0x2a
ü
0x2a
ü
K0
ü
K1
ü
A730x Description
Enables the Codablock A (Code 39-
based) symbology (if enabling this
X
symbology, it is recommended to
disable Code 39 to prevent conflict).
Enables the Codablock F (Code 128-
based) symbology (if enabling this
ü
symbology, it is recommended to
disable Code 128 to prevent conflict).
A single character inserted before the
X bar code data to indicate the
symbology.
A single character inserted before the
bar code data to indicate the
ü
symbology.
User-defined symbology identifier.
X
Range is 0-4 characters.
User-defined symbology identifier.
ü
Range is 0-4 characters.
56