Honeywell A700 Hardware Reference Manual page 285

Number Text
Communications error: Process message
0x1403
service send error.
Communications error: Process message
0x1406
service GetIdFromName error.
Communications error: Unable to close
0x140a
Vocollect configuration file.
Communications error: Unable to delete
0x140f
Vocollect configuration file.
Communications error: Vocollect network
0x1410
transport information registration failed.
Communications error: Unrecognized
0x1411
process message service message.
Communications error: Unable to spawn
0x1414
bar code process.
Communications error: Unable to spawn
0x1415
serial process.
Communications error: Bad FTP
0x1417
command.
Communications error: Bad socket
0x141b
command.
0x1420 Error: Unable to initialize bar code port.
Display Mode host name or IP address
0x1421
bad.
0x1422 Display Mode service name or port bad.
Error: Unable to initialize Debug/training
0x1423
COM port.
0x1425 Socket host name or IP address bad.
263
Solution
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
4. Reload the task.
5. Verify the task's output data records (ODRs) and lookup tables
(LUTs) have correct and valid socket host and service
information. If you need assistance, contact Vocollect.
Voice Device and Headset Hardware Reference Guide