Honeywell A700 Hardware Reference Manual page 289

Error Message
"Failed to load task audio file. Task load failed."
"Failed to load task phonetic file. Task load failed."
"Failed to load task VCF file. Task load failed."
"Failed to load device emulation config file. Task load
failed."
"Failed to write the ODR NTI registration file. Task load
failed."
"Firmware error while changing task. Task not changed."
"Flash error."
"Flash is full. Please wait while Talkman turns off."
"Headset battery is getting low."
"Headset battery is getting low. Change headset battery
now."
"Initializing operator failed. Please reload operator."
"Internal error loading operator."
"Invalid operator file name."
"Invalid device Manager Host name or address."
"Invalid device Manager Service name or port."
267
Solution
1. Go to an area of known good coverage.
2. Turn the device off and then turn it back on again.
3. Reload the task.
4. Reboot the device.
5. Reload VoiceClient.
1. Go to an area of known good coverage.
2. Turn the device off and then turn it back on again.
3. Reload the task.
4. Reboot the device.
5. Reload VoiceClient.
1. Go to an area of known good coverage.
2. Turn the device off and then turn it back on again.
3. Reload the task.
4. Reboot the device.
5. Reload VoiceClient.
1. Go to an area of known good coverage.
2. Turn the device off and then turn it back on again.
3. Reload the task.
4. Reboot the device.
5. Reload VoiceClient.
1. Reload the task.
2. Turn the device off and then turn it back on again.
3. Reboot the device.
4. Reload VoiceClient.
1. Reload the task.
2. Turn the device off and then turn it back on again.
3. Reboot the device.
4. Reload VoiceClient.
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
1. Go to an area of known good coverage.
2. Turn the device off and then turn it back on again.
3. Reboot the device.
4. Reload VoiceClient.
Change the battery.
Change the battery.
1. Reload the operator.
2. Turn the device off and then turn it back on again.
3. Reboot the device.
4. Reload VoiceClient.
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
Select the operator again or load a different operator.
Voice Device and Headset Hardware Reference Guide