Chapter 6 - Peripherals; Bluetooth Peripherals; Wireless Headsets; Bar Code Scanners - Honeywell A700 Hardware Reference Manual

CHAPTER
PERIPHERALS
6
NOTE
The peripherals below have been tested with the A700/A700x using the latest VoiceCatalyst
release for each device type. Additional solutions should be discussed with Product
Management, Sales, and Tech Support to determine if any unlisted peripherals may work
with the A700/A700x solution or may be considered for inclusion in future releases.
Also see: "Accessories"

Bluetooth Peripherals

Pairing Bluetooth peripherals is most reliable when pairing via VoiceConsole. In addition,
authentication between the device and the peripheral is required. Manual pairing of peripherals is
possible in some instances (more likely if the device and peripheral are close together), but may
take several attempts. Workaround is to configure peripherals to use authentication and pair
them using VoiceConsole. Peripheral-specific information is included below.

Wireless Headsets

See pairing information for wireless headsets.

Bar Code Scanners

Honeywell 8680i Wearable Mini Mobile Computer

NOTE
Refer to the 8680i User Guide

Device as Initiator

Configure 8680i

The 8680i must be set to Host Reconnect Mode (the 8680i will attempt to connect to the
l
device host, and if disconnected the device will manage the reconnection).
The 8680i must be configured to add termination characters (i.e., <CR><LF>).
l
169
for additional information and configuration bar codes.
Voice Device and Headset Hardware Reference Guide