Remove The A700/A700X Vmt From The Vehicle - Honeywell A700 Hardware Reference Manual

1. Connect the VMT dock (BL-904) to the cable (CM-904-101)
2. Connect the cable to the power supply.
3. Slide the Talkman device into the dock.

Remove the A700/A700x VMT from the Vehicle

Talkman VMT components are designed for easy removal for occasional vehicle service,
maintenance or flexible operational needs. The Talkman A700/A700x may be easily removed by
sliding the device out of the dock and replaced by sliding it back in. Care should be taken to
assure that the contacts of the Talkman device are on the underside and facing so they engage
with the contacts of the vehicle dock.
The dock may be easily disconnected from the CM-904-101 power cable and RAM mount should
the vehicle be taken out of service or need to be cleaned. The BL-904 dock should never be
exposed to jets of waters such as that used in cleaning vehicles.
CAUTION
Honeywell does not recommend removing the cable (CM-904-101) from the dock except
when required for occasional service, or once per month maximum. Excessive removal of
the cable can cause damage to the dock and cable that is not covered under warranty or
service plans.
93 Voice Device and Headset Hardware Reference Guide