Korea Post - Honeywell A700 Hardware Reference Manual

The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\China Post]
Registry Key
ChinaPostActivation
ChinaPostBarCodeLengthL1
ChinaPostBarCodeLengthL2
ChinaPostBarCodeLengthL3
ChinaPostBarCodeLengthMode
ChinaPostCodeMark
ChinaPostUDSI

Korea Post

Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Korea Post]
Registry Key
KoreaPostActivation
Voice Device and Headset Hardware Reference Guide
Default
A730
Value
0 X
0x04 X
0x00 X
0x00 X
0 X
0x2A X
P8 X
Default
A730
Value
0 X
A730x Description
Enables the symbology.
ü
Length value L1. Range is 0x0 to 0xFF
ü
(0 to 255).
Length value L2. Range is 0x0 to 0xFF
ü
(0 to 255).
Length value L3. Range is 0x0 to 0xFF
ü
(0 to 255).
Length verification mode, where
0 = "L1 is min length",
1 = "L1, L2, L3 are fixed lengths" – Not
ü
supported on A730x,
2 = "L1 is min, L2 is max length".
A single character inserted before the
bar code data to indicate the
ü
symbology.
User-defined symbology identifier.
ü
Range is 0-4 characters.
A730x Description
Enables the symbology.
ü
64