Registry Key
MSICodeMark
MSICheckDigitVerification
MSIBarCodeLengthL1
MSIBarCodeLengthL2
MSIBarCodeLengthL3
MSIBarCodeLengthMode
MSICheckDigitTransmission
MSIUDSI
Plessey Code
Support for the parameters in the table is labeled as follows:
= Parameter is supported and available via the Scanner Options tab in the device profile.
ü
X
= Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Plessey Code]
Voice Device and Headset Hardware Reference Guide
Default
A730
Value
0x44
ü
0x1
ü
0x6
ü
0x0
ü
0x0
ü
0x0
ü
0x1
ü
B8
ü
A730x
Description
A single character inserted before the
barcode data to indicate the
ü
symbology.
Enables various check digit
calculations, where
ü
1 = modulo 10 and
2 = double modulo 10.
Length value L1. Range is 0x0 to 0xFF
ü
(0 to 255).
Length value L2. Range is 0x0 to 0xFF
ü
(0 to 255).
Length value L3. Range is 0x0 to 0xFF
ü
(0 to 255).
Length verification mode, where
0 = "L1 is min length",
1 = "L1, L2, L3 are fixed lengths" – Not
ü
supported on A730x,
2 = "L1 is min, L2 is max length".
X
Enable transmission of the check digit.
User-defined symbology identifier.
ü
Range is 0-4 characters.
48