Srx3 Headset Battery Charger Specifications - Honeywell SRX3 User Manual

SRX3 Headset Battery Charger Specifications

20-Bay Charger
8 lbs. (3.63 kg.) with 20 batteries
Weight
6.38 lbs. (2.89 kg.) without batteries
Width Approximately 55 cm (21.65 in.)
Depth Approximately 15.8 cm (6.22 in.)
Height Approximately 15.7 cm (6.18 in.)
Power supply input voltage: 90VAC to
Input 264VAC, 50/60Hz
Power supply input current: 2A max
Power supply output voltage: 12V
Power supply output power: 80W max
Output Less than 40W required to charge 20
batteries from fully depleted to fully
charged.
Cord Uses standard IEC 60320 plug
Operating
32° to 104° F (0° to 40° C)
Temperature
Storage
-40°F to 158°F (-40° to 70°C)
Temperature
5% - 95% relative humidity, non-
Humidity
condensing
SRX3 User Guide - Preliminary
NOTE
Packaging varies for product shipments. Generally, packing materials are
about 15% of the total shipment weight.
CAUTION
The 5V power supply for the 6-bay unit is a small wall-mounted supply at
the end of the cord. The Plug Socket of the power supply is considered the
Disconnect Device to the A.C. Mains. The socket-outlet shall be installed
near the equipment and shall be easily accessible.
6-Bay Charger
2.5 lbs. (1.14 kg.) with 6 batteries
2.1 lbs. (.96 kg.) without batteries
Approximately 26.67 cm (10.5 in.)
Approximately 11.43 cm (4.5 in.)
Approximately 12.06 cm (4.75 in.)
Power supply input voltage: 100VAC to
240VAC, 50/60Hz
Power supply input current: 2A max
Power supply output voltage: 5V
Power supply output power: 20W max
Less than 10W required to charge 6
batteries from fully depleted to fully
charged.
Uses wall adapter with switchable plugs
provided in kit
32° to 104° F (0° to 40° C)
-40°F to 158°F (-40° to 70°C)
5% - 95% relative humidity, non-
condensing
58