Usb Connector; Canbus / Audio Connector; Power Supply Connector - Honeywell Thor VM1 User Manual

USB Connector

CANbus / Audio Connector

Power Supply Connector

3 - 8
The USB connector is a D-9 female connector located on the back of the Quick Mount Smart
Dock. See USB Connector
Power the Thor VM1 off before attaching a cable to any port (serial, USB, Audio/CAN, etc.).
See Connect USB Host
tion.
The CANbus/Audio connector is a D-15 male connector located on the back of the Quick
Mount Smart Dock.
The connector supports a headset adapter cable or a CANbus cable. The Thor VM1 does
not support connecting audio and CANbus simultaneously.
See CANbus / Audio Connector
A headset cable attaches to the CANbus / Audio connector and provides a quick connect
connection for a headset. See
The CANbus Y cable has a 9 pin F SAE J1939 (Deutsch) and 9 pin M SAE J1939 (Deutsch)
connector. See Connect CANbus Cable
The CANbus interface is a virtual COM9 port. This port can be accessed using standard
Windows API calls.
Power is supplied to the Thor VM1 through the power connector. Additionally this assembly pro-
vides a connection point for the vehicle's chassis ground to be connected internally to the conduc-
tive chassis of the computer.
The Thor VM1 internal power supply can accept DC input voltages in the range of 10 to 60 Volts
DC.
See Power Supply Connector
14) for more information on connecting power to the Thor VM1.
(page 10-5) for connector pinout detail.
(page 4-33) and Connect USB Client
(page 10-6) for connector pinout detail.
Connect Headset Cable
(page 4-36) for more information.
(page 10-4) for connector pinout detail. See
(page 4-34) for more informa-
(page 4-35) for more information.
Connect Power (page 4-