Hitachi Compute Blade 2000 User Manual page 623

If you enter S in the BSM command menu and press Enter, the current port number
setting that receives requests from SC/BSM appears. At the prompt, press Enter or
enter a port number and press Enter. The changed setting value is displayed. A
confirmation message appears. At the prompt, enter Y and press Enter, and the port
number setting is saved. To cancel the setting, enter N and press Enter, or just press
Enter.
The port used for connecting to SC/BSM will be closed when you perform the following
setting.
1. Delete all managers for notification set in the management module.
2. Type 0 into the port number set in the management module to receive requests
from SC/BSM.
(S,[Q]) : S (Enter)
Command port : 21001
(1-65535,[Unchange]) : 21002 (Enter)
-- Basis detail setting --
Command port : 21002
Confirm? (Y,[N]) : Y (Enter)
- Writing setting was completed.
Hit enter key. (Enter)
If you enter DM in the BSM command menu and press Enter, you are asked to select
SC/BSM connection setting. At the prompt, enter the SC/BSM connection setting
number specified, and the current setting is displayed.
(M,D,DB,DM,T,[Q]) : DM (Enter)
(S,[Q]) : S (Enter) Select manager (0-3,[Q=Quit]) : 1 (Enter)
-- Manager detail setting --
Command port : 21001
No. : 1
(1-65535,[Unchange]) : 21002 (Enter)
Name : BSM_1
IP address
-- Basis detail setting --
Alert port Command port : 21002
Alert level
Retry interval (sec) : 5
Confirm? (Y,[N]) : Y (Enter)
Retry duration (min) : 10
- Writing setting was completed.
Hit enter key. (Enter)
-- Manager setting menu --
S. Edit setting.
Q. Quit.
(S,[Q]) :
Select a menu item in the table below to execute the function.
Menu
S. Edit setting.
Q. Quit
: 192.168. 0.253
: 20079
: Alert
Edits details of SC/BSM connection setting.
Returns to the previous menu.
572
Description