Roof Molding Replacement
1. A p p l y protective tape to the body (A). Using a flat-
t i p screwdriver w r a p p e d w i t h protective tape (B),
pry up o n the roof molding (C). Take care not to
scratch the body.
2. Pull up and slide the roof m o l d i n g to release the
f r o n t bracket (D) f r o m the pin (E).
3. Pull up the front portion of roof molding.
4. Pull up and release the rear bracket (A) f r o m the pin
(B), then remove the roof m o l d i n g (C).
A
5. Install the m o l d i n g in the reverse order of removal,
and note these items:
• Take care not t o damage the w i n d s h i e l d and rear
w i n d o w moldings.
• Make sure the roof m o l d i n g is installed securely.
20-163