Side Sill Panel Replacement - Coupe - Honda 2002 Accord Manual

Side Sill Panel Replacement - Coupe
1. Remove the side sill panel.
- 1 If equipped, remove the splash guard (A).
- 2 Pull the inner fender (B) back as necessary, and remove the expansion clips <C),
- 3 Slide the side sill panel (D) f o r w a r d and remove it. Side clips (E) w i l l stay in the body.
- 4 Remove the side clips f r o m the body.
F a s t e n e r L o c a t i o n s
• : S c r e w , 4 C > : C l i p , 4 E t > : C l i p , 1 2
2. Replace any damaged clips.
3 . Install the side clips on the side sill panel.
4. Hold the panel up, and fit all the side clips into the holes in the body, then push on the panel until the clips snap
into place.
5. install all the expansion clips.
6. Reinstall the inner fender and splash guard (if equipped).
20-165