Trunk Lid Opener/Fuel Fill Door Opener Replacement - Honda 2002 Accord Manual

Openers
Hood Latch Replacement (cont'd)
4. Install t h e latch in the reverse order of removal, and
note these items:
• Grease each location of the hood latch indicated
by the a r r o w s .
• Make sure the h o o d opener cable is connected
properly a n d h o o d latch switch connector is
connected p r o p e r l y .
• A d j u s t the h o o d latch alignment (see page 20¬
151).
• Make sure t h e h o o d locks securely.
Trunk Lid Opener/Fuel Fill Door
Opener Replacement
1. Using a flat-tip screwdriver wrapped w i t h
protective tape, pry open the cover (A), and remove
the opener lock cylinder (B) f r o m the opener (C).
2. Pry out the access hole cover (A), and loosen the
bolt.
F a s t e n e r L o c a t i o n
• : Bolt 1
3. Remove the opener (B) f r o m the bolt, and release
the hook (C) by sliding the opener backward.
2 0 - 1 7 6