Fuel Line/Quick-Connect Fitting Installation - Honda Accord 2008 Manual

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:18:31 61TA0000_110_0369

Fuel Line/Quick-Connect Fitting Installation

NOTE: Before you work on the fuel lines and fittings,

read the ''Fuel Line/Quick-Connect Fitting Precautions''

(see page 11-365).

1. Check the contact area (A) of the line (B) for dirt or

damage, and clean it if needed.

2. Insert a new retainer (A) into the connector (B) if the

retainer is damaged, or after:

• replacing the fuel rail.

• replacing the fuel line.

• replacing the fuel pump.

• replacing the fuel filter.

• replacing the EVAP canister.

• replacing the fuel fill pipe.

• replacing the fuel tank.

• removing the retainer from the line.

• Use the same manufacturer retainer and the

same size retainer when the replacing the

retainer (see page 11-366).

3. Before connecting a new fuel tube/quick-connect

fitting assembly (A), remove the old retainer from

the mating line.

ＴＡ０８ＡＥ４Ａ２０３２６４２８００１ＫＣＡＴ００

Table of Contents