Version Numbers Of Compatible Programming Tools - Mitsubishi Electric Melsec-F FX3GC Series User Manual

FX /FX /FX /FX /FX
3S 3G 3GC 3U 3UC
Built-in Positioning Functions
1.4

Version Numbers of Compatible Programming Tools

Use a software version compatible with the used equipment version for programming.
1. GX Works2
1) GX Works2 English version (SWDNC-GXW2-E) is applicable to FX
from the following versions.
Model name
FX PLC
3S
FX PLC
3G
FX PLC
3GC
FX PLC
3U
FX PLC
3UC
2) GX Works2 Japanese version (SWDNC-GXW2-J) is applicable to FX
PLCs from the following versions.
Model name
FX PLC
3S
FX PLC
3G
FX PLC
3GC
FX PLC
3U
FX PLC
3UC
2. GX Developer
1) GX Developer English version (SWD5C-GPPW-E) is applicable to FX
following versions.
Model name
FX PLC
3G
FX PLC
3U
FX PLC
3UC
2) GX Developer Japanese version (SWD5C-GPPW-J) is applicable to FX
following versions.
Model name
FX PLC
3G
FX PLC
3U
FX PLC
3UC
Point:
• It is possible to create programs in FX
selecting "FX
3G
• It is possible to create programs in FX
selecting "FX
3G
be set to 4000 steps or less.
PLC User's Manual - Positioning Control Edition
PLC version
Ver. 1.00 or later
Ver. 1.00 or later
Ver. 1.40 or later
Ver. 2.20 or later
Ver. 1.00 or later
PLC version
Ver. 1.00 or later
Ver. 1.00 or later
Ver. 1.40 or later
Ver. 2.20 or later
Ver. 1.00 or later
PLC version
Ver. 1.00 or later
Ver. 2.20 or later
Ver. 1.00 or later
Ver. 2.20 or later
PLC version
Ver. 1.00 or later
Ver. 2.20 or later
Ver. 1.00 or later
Ver. 1.30 or later
Ver. 2.20 or later
3GC
" as the alternative model.
PLC using programming tools of inapplicable versions by
3S
" as the alternative model. However, memory capacity setting of the PLC parameter must
1.4 Version Numbers of Compatible Programming Tools
Applicable GX Works2
version
Ver. 1.492N or later
Ver. 1.08J or later
Ver. 1.77F or later
Ver. 1.08J or later
Ver. 1.08J or later
Applicable GX Works2
version
Ver. 1.492N or later
Ver. 1.07H or later
Ver. 1.77F or later
Ver. 1.07H or later
Ver. 1.07H or later
Applicable
GX Developer version
Ver. 8.72A or later
Ver. 8.24A or later
Ver. 8.18U or later
Ver. 8.24A or later
Applicable
GX Developer version
Ver. 8.72A or later
Ver. 8.23Z or later
Ver. 8.13P or later
Ver. 8.18U or later
Ver. 8.23Z or later
PLC using programming tools of inapplicable versions by
/FX /FX /FX /FX
3S 3G 3GC 3U 3UC
Remarks
-
-
-
-
-
/FX /FX /FX
3S 3G 3GC
Remarks
-
-
-
-
-
/FX /FX PLCs from the
3G 3U 3UC
Remarks
-
-
-
The built-in positioning setting was added
/FX /FX PLCs from the
3G 3U 3UC
Remarks
-
-
-
-
The built-in positioning setting was added
1 Outline
A
B
PLCs
Apx.
/FX
3U 3UC
B - 9