Mitsubishi Electric Melsec-F FX3GC Series User Manual page 92

FX /FX /FX /FX /FX
3S 3G 3GC 3U 3UC
Built-in Positioning Functions
Device number
Y000 Y001
M8460 M8461
M8464 M8465
*1. Y002 is not available in FX
*2. Y003 is available only when two high-speed output special adapters are connected to the FX
*3. Only available for FX
*4. Cleared when PLC switches from RUN to STOP.
*5. Only available for FX
*6. Only available for FX
*7. For the user interrupt input command, the logical NOT function will not be activated.
*8. Only available for FX
B - 48
PLC User's Manual - Positioning Control Edition
*1 *2
Y002 Y003
M8462 M8463 User interrupt input command
CLEAR signal device specification
M8466 M8467
function enable
PLC (14-point and 24-point type) and FX
3G
PLC Ver. 2.20 or later and FX
3UC
PLC Ver. 1.30 or later and FX
3UC
/FX PLC.
3U 3UC
PLC Ver. 2.20 or later and FX
3UC
Function Attribute
*4,*8
Drivable
Drivable
*3,*4
/FX
3S
/FX /FX /FX
3S 3G 3GC 3U
PLC.
3U
PLC.
3U
4 Before Programming
4.1 List of Related Devices
Corresponding
instructions
DVIT
DSZR,ZRN
PLC.
3GC
PLC.
3U
PLC.
Refer to
Subsection
4.3.7
Subsection
4.3.4