Performance Specifications - Mitsubishi Electric Melsec-F FX3GC Series User Manual

FX /FX /FX /FX /FX
3S 3G 3GC 3U 3UC
Built-in Positioning Functions
2.3

Performance Specifications

Model
Number of control axes
Interpolation
Pulse output form
Pulse output method
Maximum frequency
Acceleration/
deceleration type
Unit
Positioning range
Program language
Position data
Connection of
pulse generator
Detection of absolute
position
(Reads out the current
value of ABS.)
Others
*1. For MELSERVO Series amplifiers, use a sink input/sink output type PLC.
*2. Can only be connected to the FX
*3. If 2 adapters are connected, Y000 to Y007 will be used. If only one adapter is connected, Y000,
Y001, Y004, and Y005 will be used. The relation between the output of the FX
output of main unit is described in the following sections.
To use high-speed output special adapters, refer to Subsection 1.5.3 and Section 4.9 of "B. Built-in
B - 18
PLC User's Manual - Positioning Control Edition
FX (14-point and 24-
3G
point type) /FX
3S
*1
PLC (main unit,
transistor output)
2 independent axes
"Pulse train + direction" method
manual
Pulses can be output from
the general-purpose
outputs (Y000 and Y001)
of the main unit.
3U
FX (40-point and 60-point
3G
/FX
3GC
type) /FX /FX
3U
(main unit, transistor
output)
3 independent axes
-
Transistor
100,000Hz
Trapezoidal acceleration/deceleration
pulse
-999,999 to +999,999 (pulse)
Sequence program
1 point (set in sequence program)
-
ABS instruction
Pulses can be output from the
general-purpose outputs
(Y000, Y001 and Y002) of the
main unit.
PLC. Up to 2 adapters can be connected.
2.3 Performance Specifications
*1
PLC
3UC
FX -2HSY-ADP
3U
2 independent axes
(Connect 2 adapters to the
main unit to control 4 axes
independently.)
Differential line driver
"Pulse train + direction"
method
"Forward/reverse rotation
pulse train" method
200,000Hz
• To be used when a servo
amplifier with a
differential line receiver is
connected.
• To be used when
positioning control is
performed with a FX
Series relay output type
or triac output type main
unit.
• Used in place of the
general-purpose outputs
(Y000 to Y007)
main unit.
-2HSY-ADP and the
3U
Positioning Function".
2 Specifications
*2
-
-
3U
*3
of the