Outline; Features - Mitsubishi Electric Melsec-F FX3GC Series User Manual

FX /FX /FX /FX /FX
3S 3G 3GC 3U 3UC
Built-in Positioning Functions
1.

Outline

This chapter describes a general outline of the positioning modules. Note that the general outputs of the
FX /FX /FX
3S 3G 3GC
adapter are needed for positioning control.
1.1

Features

1) The general outputs of the FX
*1
axes for positioning operations.
2) If one high-speed output special adapter (FX
axes for the positioning operation. If 2 high-speed output special adapters are connected, the adapters
can control up to 4 axes for the positioning operation.
3) The FX /FX
3S
positioning control.
4) The general outputs of the FX
train of 100 kHz.
5) The FX -2HSY-ADP high-speed output special adapter (differential line driver system) can output a
3U
pulse train of 200 kHz.
6) The FX -2HSY-ADP high-speed output special adapter can switch the output method between "pulse
3U
train + direction" method and "forward/reverse rotation pulse train" method.
If the general outputs of the FX
*1
3 axes , maximum
Servo amplifier (drive unit)etc.
1-axis 2-axes
If FX -2HSY-ADP adapters are connected to the FX
3U
4 axes, maximum
Servo amplifier (drive unit)etc.
1-axis 2-axes 3-axes
*1. 2 independent axes in the FX
PLC User's Manual - Positioning Control Edition
/FX /FX PLC (transistor output) and FX
3U 3UC
/FX /FX
3S 3G
/FX /FX /FX PLC positioning instructions (applied instructions) are used for
3G 3GC 3U 3UC
/FX /FX
3S 3G
System
/FX / FX /FX
3S 3G 3GC
FX /FX
3S
3-axes
PLC (transistor output)
FX -2HSY
3U
4-axes
-ADP
2nd 1st
PLC (14-point and 24-point type) and FX
3G
-2HSY-ADP high-speed output special
3U
/FX /FX PLC (transistor output) can control up to 3
3GC 3U 3UC
-2HSY-ADP) is connected, the adapter can control up to 2
3U
/FX /FX PLC (transistor output) can output a pulse
3GC 3U 3UC
/FX PLC are used:
3U 3UC
...
...
/ FX
/FX /FX
3G 3GC 3U 3UC
...
...
...
PLC:
3U
...
FX PLC
3U
...
...
...
...
1.1 Features
Points and references
Number of controllable axes
To check the PLC model,
refer to Section 1.3.
For a detailed description of
the positioning instructions,
refer to Chapters 6 to 11.
For a detailed description of
the input/output specifications,
refer to Section 2.4 and
Section 2.5.
For examples of connection,
refer to the Appendix.
Number of controllable axes
To check the PLC model,
refer to Section 1.3.
For a detailed description of the
positioning instructions, refer to
Chapters 6 to 11.
For a detailed description of the
input/output specifications, refer
to Section 2.4 and Section 2.5.
For examples of connection,
refer to the Appendix.
/FX PLC.
3S 3GC
1 Outline
A
B
Apx.
B - 3