Introduction; Outline - Mitsubishi Electric Melsec-F FX3GC Series User Manual

FX /FX /FX /FX /FX
3S 3G 3GC 3U 3UC
Common Items
1.

Introduction

This manual describes the positioning control for the FX
In this chapter, a brief description of the positioning products is provided.
1.1

Outline

The FX /FX /FX
3S 3G
to control the positioning operation.
Increase the pulse frequency to increase the motor speed. Increase the number of pulses to increase the
number of motor revolutions. In other words, set the pulse frequency to determine the workpiece transfer
(positioning) speed.
Set the number of pulses to determine the workpiece transfer distance.
Servo motor or
stepping motor
PLC User's Manual - Positioning Control Edition
/FX /FX PLC outputs the pulse signal to the servo motor and the stepping motor
3GC 3U 3UC
Pulse frequency
Number of
pulses
Positioning command
/FX /FX /FX
3S 3G 3GC
Pulse train signal
: Transfer speed
: Transfer distance
Workpiece (item to be positioned)
1 Introduction
1.1 Outline
/FX PLC.
3U 3UC
FX /FX /FX /FX /FX PLC
3S 3G 3GC 3U 3UC
A
B
Apx.
A - 3